无人机载线阵摆扫CCD影像几何校正

针对无人机载线阵CCD传感器摆扫成像的技术特点,利用GPS/INS组合导航系统提供的导航遥测数据,对无人机载的线阵摆扫CCD影像建立了严格的成像模型,并设计了详细的几何校正流程。实验结果证实采用文中的成像模型和几何校正流程,可获得正确、高精度地理编码的线阵摆扫CCD正射影像。     

MAPGIS投影变换子系统的应用

介绍了利用MAPGIS投影变换子系统对地质勘查成果图件进行投影转换的方法步骤,同时用实例说明了不同坐标系之间投影转换过程中的参数选择,对计算机制图具有一定的借鉴作用。     

利用GPS水准点精化局部CQG2000

CQG2000模型的精度仍不能满足中、大比例尺的测图需要,如何充分利用现有成果,提高其价值和实用性,是目前需要迫切解决的问题。本文提出了通过加密GPS水准点来提高现有CQG2000精度的方法,并研究了GPS水准点数目和分布对提高结果的影响。     

Progress in Environmental Evolvement and Environmental Archaeology Study in the Yangtze Delta （China）

A review was conducted on the environmental evolvement and environmental archaeological research since the 1980s in the Yangtze Delta. Former environmental evolvement and environmental archaeological research results can be summed up into 4 aspects： 1） Formation and evolution of the Taihu Lake; 2） Transgression and sea-level changes in the Holocene epoch; 3） Reconstruction of the pre-historical environment; and 4） Impacts of environmental variations on the rise and fall of human civilization （formation of the cultural interruptions）. Based on this review, some limitations in the present research methods and possible outcomes are pointed out in this paper.     

平面约束条件在LIDAR点云滤波中的应用

介绍了一种利用平面约束条件对LIDAR点云数据进行滤波的方法,利用每个数据点的邻域点拟合平面,根据平面约束条件和平面点分类方法得到地面点,最后利用地面点内插该区域的DTM.     

内陆河流域山区水文与生态研究

以河西走廊黑河干流山区流域为例,从山区水文循环、水文与生态系统以及径流形成和预测等方面讨论山区流域水文和生态相互作用研究的有关问题。山区降水的空间和时间分布规律和固态、液态降水组成变化主要受制于海拔和地形的影响,而不同海拔和地形条件下的下垫面不同土地覆被和复杂的空间异质性则主要影响蒸散发量。对内陆河山区流域的水文小循环的研究,有助于进一步研究和认识内陆河流域上、中、下游水文和生态系统的相互联系问题。至今,对山区水文过程与生态系统的相互作用问题的研究还非常薄弱,需要研究山区森林草地生态系统在山区水文循环中的作用以及在维持和保护山区生态和环境中的作用和意义。内陆河流域山区水文过程复杂而综合性强,须加强对山区径流形成机理的多学科交叉研究,不断改善出山径流对气候变化和人类活动响应过程的模拟和预测水平。     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

Benthic nutrient fluxes in the intertidal flat within the Changjiang （Yangtze River） Estuary

In an annual cycle from March 2005 to February 2006, benthic nutrient fluxes were measured monthly in the Dongtan intertidal flat within the Changjiang （Yangtze River） Estuary. Except for NH4^＋, there always showed high fluxes from overlying water into sediment for other four nutrients. Sediments in the high and middle marshes, covered with halophyte and consisting of macrofauna, demonstrated more capabilities of assimilating nutrients from overlying water than the low marsh. Sampling seasons and nutrient concentrations in the overlying water could both exert significant effects on these fluxes. Additionally, according to the model provided by previous study, denitrification rates, that utilizing NO3- transported from overlying water （Dw） in Dongtan sediments, were estimated to be from -16 to 193 μmol·h^-1·m^-2 with an average value of 63 μmol·h^-1·m^-2 （n=18）. These estimated values are still underestimates of the in-situ rates owing to the lack of consideration of DN, i.e., denitrification supported by the local NO3^- production via nitrification.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.